Osx86 install 10.5.2 update keeps hard restarting

HPET has also been disabled. Legacy support for socket 7 has been added as a boot option Here is the semthex OTB 1. Older Posts. Design Studio. Distributed by e Blog Templates. Categories Link List Charlessoft. If it does please comment it down and if you can also note the different steps to install OSX on your specific hardware. If the hardware specified above is the same as yours or really similar graphics, sound, wireless card, ethernet card then you shall procceed!

Then just reboot. Download Kalyway OSX So let us begin. If your bios version is not A17 you will need to update it. Reboot You are ready. After downloading freeDOS and installing it on the flash drive, open your file manager and copy the BIOS update exe, from the previous link. Find somehow the current IP address of your wireless network and note it somewhere. Thanks to : machani for this link here I modified and posted the procedures below.

Follow this screenshoot when creating the bootable USB here. This screenshot seems to be done from a Linux machine. Verify that that is the correct drive letter for your USB flash drive. It's only meant for emergencies and may void your warranty, so use at your own risk. FD, that's important. Do not remove the USB stick. Turn the AA1 off, make sure both battery and AC adapter are connected. Press the power button once. After a while the power button will stop blinking, and the AA1 will reboot shortly after.

Wait patiently. If for some reason you made a mistake during the procedure and it doesn't reboot by itself wait 5 minutes before turning it off, just to be safe that it isn't still flashing the BIOS.

You'll next be presented with your language select screen. I imagine you want English, so just hit enter! It'll then sit doing 'Preparing Installation' for a while. When you get the 'Welcome' screen, don't hit continue straight away! Move your point to the 'Utilities' menu, and select 'Disk Utility'.

When the Disk Utility application has loaded, click your main drive in the left hand pane probably the very top entryis your HDD manufacturer's name'.

Under 'Volume Scheme', click '1 partition'. I choose some applications which I have used before but if you are a 1st time Mac user need you need uncheck this area. System will ask you for your password, you may enter your password. Do NOT hit restart when prompted! Type 'update -v' without the quotes obviously , and press enter. Your AA1 may reboot a couple of times during this update process. Don't panic! Since we are using Vanilla kernel now we can upgrade using Apple original update. Keep this window open while you run the downloaded update and install it.

When prompted press F8 and use "-v" to boot without quotes a lot of text msg comming out dont worry system will boot it self soon. System will take a long time to reboot let the system be until it will restart.

If in case you run out of patience it will not reboot you have to do hard reboot on the system and use "update —v" Steps on boot.

Drag and drop the HDAEnabler. I have tried solving memory card reader before on my Just go to System Preferences I haven't been able to find it elsewhere.

Any ideas? Could somebody please re-upload it elsewhere? I've successfully done all of this and it works. If you try to suspend it will actually reboot and I haven't yet done the sound fix due to ALCFIX not being available but otherwise things are working nicely. I do have some comments, though:. AltGr and the Windows "Menu" key don't seem to do anything.

The interface WILL show up but it will always show as disconnected even when you plug in a cable. The "estimated time remaining" gauge is currently going down faster than real-time but it might be a calibration problem. As soon as I have more info I'll report on actual battery running time as well as whether the time display gets corrected after calibration. Don't know how long it will be active, though.

Does this install allow the AAO to sleep properly? I'd love to see my AAO finally be able to sleep. More important, this version allows you to update to All goes well for me until i get to the part where i do the combo update to After installing both packages.